Loading

Triton Floor Levelling Compound

Suitable for the preparation of sound sub floors ready for the installation of floor coverings on both absorbent and non-absorbent surfaces such as old adhesive residue, asphalt, steel, terrazzo, epoxy and polyester resins, and ceramics.

Where added adhesion, strength and flexibility are required then the use of Triton Latex Modified Floor Levelling Compound is recommended – see below.

Supplied in 25kgs bags as dry powder, for the Latex Modified version, add five litres of Triton LPA/ Primer to 25kg Triton Floor Levelling Compound.

Available in 25 kg packs.

Downloads:

NBS Plus Product Entry
Download (78Kb)

Triton Floor Levelling Compound Data Sheet
Download (168Kb)

Triton Floor Levelling Compound Material Safety Data Sheet Download (213Kb)

Technical Drawing FLC 072.1
Download (86Kb)

CE Marking Certificate
Download (486Kb)

Top of page

Triton LPA/Primer

Triton LPA/Primer is a ready to use emulsion that improves the adhesion, water resistance and strength of Triton Flooring Compound. It also improves workability and durability of cement mixes such as renders and screeds and is suitable as a priming solution for walls. When added to Triton’s standard Floor Levelling Compound, it will give a Latex Modified Floor Levelling Compound.

Available in 5 litre packs.

Downloads:

NBS Plus Product Entry
Download (78Kb)

Triton LPA/Primer Data Sheet
Download (57Kb)

Triton LPA/Primer Material Safety Data Sheet
Download (102Kb)

Top of page

Triton Fleece Band

Triton Fleece Band is a reinforcing fabric for use with Triton TT Vapour Membrane and is specifically designed for use within liquid applied waterproofing systems.

Downloads:

NBS Plus Product Entry
Download (78Kb)

Triton Fleece Band Data Sheet
Download (61Kb)

Top of page

Trifix

Trifix is a two part epoxy resin sealant which can be used to seal unavoidable puncturing of the Triseal membrane. Trifix can also be used where the bund is provided by metal angles.

Downloads:

Trifix Data Sheet
Download (102Kb)

Trifix Adhesive Material Safety Data Sheet
Download (135Kb)

Flooring Systems Brochure
Download (938Kb)

Top of page

Triton Fillet Seal

Waterproofing Systems - Cementitious & Epoxy Systems picture

A pre-packed cement based and polymer modified product for use as a floor to wall junction seal during waterproofing works when using cementitious slurry coatings such as Triton TT55. In most circumstances, Fillet Seal need only be mixed with water for use. Where extra adhesion is required, Triton SBR may be used. Note: Where water is leaking or seeping the use of Triton Quick Set is advised.

The use of Fillet Seal helps to ensure a smooth transition between horizontal and vertical surfaces which minimises the risk of leaving gaps or holes unsealed during the waterproofing works.

Preparation:

Situations where the Fillet Seal will be employed should already have been prepared in accordance with the slurry coating or render specification. In the majority on instances, the Fillet Seal will be applied on to the slurry coated surface.

NB: Triton Fillet Seal is a pre-packed, cement based and polymer modified product for use as a floor to wall junction seal during waterproofing works when using cementitious slurry coatings and renders. Fillet Seal helps to ensure a smooth transition between horizontal and vertical surfaces which minimises the risk of leaving gaps or holes unsealed during the waterproofing works.

Triton Fillet Seal is available in 25 kg bags.

Downloads:

Triton Fillet Seal Data Sheet
Download (115Kb)

Triton Fillet Seal Material Safety Data Sheet
Download (112Kb)

Flooring Systems Brochure
Download (938Kb)

Top of page